High quality grain storage is as important to a farm operation as any other piece of equipment, and GSI Bins have an excellent reputation for quality and long life. Picking the proper bin is extremely important, but knowing HOW to install them is just as important for long-term success. Here is what you can expect when preparing for the setup and installation of GSI Bins.
Pre-construction Planning and Site Preparation
The process of GSI Bin installation starts with a lot of planning and prep work. This process involves choosing the appropriate site considering drainage, access, neighbouring farm infrastructures. You need a level base that can be compacted and the larger the bin, the more likely it will be set on a concrete pad/foundation.
Engineers and construction managers would then be able to evaluate soil conditions and see whether additional groundwork is required. Utility planning like power access for fan or sensor is also discussed at this point. Good preparation will smooth out and make the bin install a safe and seamless task.
Delivery of Parts and Equipment
When the site is prepared, the bin parts are brought in. GSI Bins come divided in pieces – top portion sheets, sidewalls, ribs, base sheet, and hardware – which are all constructed right where you are to fit together. In addition, to the bin materials, equipment like cranes, scissor lifts and safety scaffolding were also trucked in.
Many of the better GSI dealers handle the shipping details and also see that every part is present before the assembly process starts. Organization and protection against the elements is especially important for larger systems.
Assembly and Erection Process
In reality, construction of GSI Bins begins with floor (if applicable), then wall sheets, then stiffeners. The roof is generally made on the ground, and then lifted into place either by a crane or hydraulic jacks. The sidewall deter sheet (no. of rings) is progressively added to bottom-up or top-down (wrap around from the top).
The method was carefully performed considering structural alignment, bolt tension and sealing status along the way by installers. GSI Bins are designed according to proven strength go close tolerances to fit your needs. Depending on the size of the bin, it can take from a few days to a couple of weeks to complete.
Construction of Aerations and Control Systems
Today’s GSI Bins may also come with sophisticated aeration systems, temperature cables, moisture monitors and other grain management technology. These structures are put up after the completion of the main building. Correct operation of fans, vents and ductwork is critical to maintaining grain quality in storage.
Technicians are also calibrating and testing all electronics at this time to ensure proper operation. Unloaded systems, as well as ladders or catwalks for safety and convenience of operation may be provided in certain installations.
Final Inspection and Handover
Prior to being put into operation, the bin will be fully inspected to make sure everything is in place and properly safe. The builder will instruct the owner on the operation of the systems and give maintenance suggestions and safety guidance. After it is cleared, the GSI Bin is available to fill.
Conclusion
GSI Bins Installation is a step by step job that requires planning, a good team of workers for proper assembly and the right tools to set it up. When you know what to anticipate during every stage, you will be able to have a successful installation and a lifetime of trouble-free grain storage.